Ooooh I love interactive cards, and if there is a cute critter involved, BONUS! I had so much fun crafting these Christmas penguins spinner cards as my first guest designer project for Maymay Made It! The little penguins look like they are all set to party, especially as they spin around.
I used 4 of the penguins from the super cute Joy Clair Christmas Penguins stamp set, and made them into front and back images. For the penguins that were not symmetrical (like the ones with the ornaments or Christmas lights on the antlers), I first did some mirror stamping (there are mirroring stamp sets like the Paper Smooches Mirror Block Stamp Set, but I used the smooth side of the very full wood grain stamp from the Lawn Fawn “Woodgrain Backdrops” set) using Momento Tuxedo Black Ink (the start-to-finish video below shows the details of how to do this). Then I crisped up the lines/details and filled in the faces with a Momento Tuxedo Black Dual Marker to make the back sides of the penguins.
For the perfectly symmetrical penguins like the ones with the Christmas sweaters, I simply stamped them out twice and filled in the faces of one of each penguin with the Momento Tuxedo Black Dual Marker to make the back side images. A little simple Copic coloring (for a rainbow of ornaments and lights: R27, YR04, Y15, YG09, B06, V06 and pink and aqua sweaters: RV52, RV55, BG32) and fussy cutting and these front-and-back penguin images were ready to sandwich a little thread to become spinners!
For the card bases, I actually used two card bases for each card. The papers, which are all in dusty blue shades with white splatters that look like snowflakes, are from an old 2013 Recollections Christmas Watercolors paper stack. There is an outer card base that measures 4.25″ x 11″ and is scored at 5.5″. This card base card front is decorated with various Diemond Dies snowflake die cuts (Icy Snowflake Die Set, Snowflake #1, and Winter Snowflake Die Set) using blue metallic card stock and white card stock with Nuvo Glitter Drops in Midnight Sky for extra shine and textural interest.
For the sentiment on the card front, I used the Hero Arts Merry Stamp & Cuts on top of a Diemond Dies Labels 1 die cut base. I had just enough blue metallic card stock to cut a couple of label frames and a handful of the snowflakes for bright shiny pops of color. All the delicate die cuts were glued on with my favorite wet glue: Art Glitter Glue with a fine metal tip nozzle. The sentiment, which I stamped using a MISTI around the die cut “MERRY,” reads, “HAVE YOURSELF A MERRY LITTLE CHRISTMAS.”
There is also an inside liner card base that measures 4″ x 10.75″ and is scored at 5 3/8″. These are simply decorated with a single large white die cut snowflake (Icy Snowflake Die Set, Snowflake #1, and Winter Snowflake Die Set) in the lower left or right corner of the top-folding card.
To attach the spinner mechanism to this inside liner, I cut a small slit in the middle of the card (through both layers) with an X-Acto knife and threaded through the slits a thin thread; mine was DMC gold metallic thread, but you could use a fishing line or clear line for a more invisible magic look. When the thread could span the card open to about 90 degrees, then I secured the thread on the back side of the card liner with 5mm adhesive sticky tape. I then sandwiched the front and back of a penguin around the middle of that thread to make the spinner.
The last step was to position the inside card base inside the outside card base and adhering everything securing into place with more 5mm adhesive sticky tape. The inside liner card base is about 1/8″ smaller on all sides from the outside card base so there is a nice matted look to the card interior.
This is the start-to-finish process video for creating these cards:
These spinner cards are being entered into the following challenges:
Joy Clair Anything Goes with Optional Layers Challenge – WINNER
Simon Says Stamp Work It Wednesday Add Sparkle Challenge
Simon Says Stamp Wednesday Splatter It Challenge
Card Mania Party Challenge
Lil Patch of Crafty Friends Anything Goes Challenge
Through the Craft Room Door Anything Goes Challenge
Not Just Cards Anything Goes Challenge
Word Art Wednesday Anything Goes Challenge
Thanks for playing at Card Mania Challenge.
Thanks so much Ileana!
Amazing artwork, I love colors 🙂
Thanks for playing with us at CardMania Challenges 🙂
Thanks so much hun! These were fun to craft!
Wow! Fabulous card! Thanks for playing with us at Card Mania Challenge 🙂
Thanks so much hun! This was fun to design and craft for the holidays. 🙂
Aww, so very cute! So sorry for the delayed comment, just been super busy. Thank you so much for linking with us at Word Art Wednesday. Leaving you some encouragement from God’s Word in Ephesians 2:10 which says, “For we are his workmanship, created in Christ Jesus for good works, which God prepared beforehand, that we should walk in them.” Be blessed!
You are so sweet to leave these encouraging words! Thank you!
So adorable!! I love that you made the front and back of the penguins! They turned out so good! Love your card too! Thanks for playing along with us at the Joy Clair August Challenge!
Thank you so much Lori! I had a blast making these cards! I am thrilled to be the August challenge winner! Thank you THANK YOU
Oh that is totally so adorable and cute card with that penguin! Super fun spinning it 🙂 Thank you so much for sharing it with Joy Clair August Challenge. I hope you will play along with us again in September!
Thank you so much Helen! I’m thrilled to have my cards selected as the monthly challenge winner!